How to make lime dye in minecraft. How to make slime at home without glue or with it

Today I will share a recipe for lime liqueur, which is also called “Limechello”.

To prepare liqueur we will need:
* Vodka - 1 liter;
* Alcohol - 200 ml (96 degrees);
* Cardamom - 3 pods;
* Sugar - 200 g;
* Water;
* Limes - 5 pcs.

The sequence of actions is as follows:
We take the limes and wash them. Cut the zest from 1-2 limes (it’s delicious either way) and squeeze out the juice from all of them. Thoroughly.
* Try to keep the zest free of white areas. The finer the zest is chopped, the faster it will impart aroma to the drink and the less time it will take to infuse.

Take a container with a volume of at least 2 liters, mark the level of 2 liters on it. Pour vodka, alcohol and juice from our limes into the container. Add zest and cardamom there.

Close the container tightly and put it in a dark place for 4-7 days. After 4-7 we prepare the syrup. Add 200 grams of sugar and 200 ml of water - pour into a saucepan with a thick bottom, put on the fire, stirring until the sugar is completely dissolved and begins to boil, but do not let it boil. Cool, skim off the foam (if any remains) and pour into our container with zest, cardamom and alcohol.

Pour another 100 ml of water into the same saucepan, rinse it and carefully begin to gradually pour it into a container with zest, cardamom and alcohol so that the total amount of product is brought to our mark of 2 liters. If it works, Barack will appear and approve.

We leave the drink alone for a couple of days, then take a sample. Well, is it delicious? :) If you leave it for a couple more days, then there will be a fire. After 2-4 days, depending on your willpower, take a bandage - gauze in 4 layers and filter the drink. Leave it for another couple of days and you can actively use it.

We use food-grade alcohol, without foreign impurities, and as odor-neutral as possible.

Limes can be replaced with lemons, grapefruits, oranges and other citrus fruits. You can mix. In general, there is no limit to creativity, the formula for making the drink is clear. It turns out delicious in any situation. Sometimes I add a little less water to 2 liters to make the drink stronger. Everything is drunk smoothly and pleasantly, no snacks or “drinking” required.

Initially, the slime toy (or “Slime” from the English Slime) was created completely by accident in 1976. An 11-year-old girl mixed the ingredients at her dad’s place of work, who worked in a factory. Slime comes in different colors (from bright to transparent) and is easily stretched, transformed into different shapes and easily wrinkled by hand. Now this is one of the most popular toys among children. There is a whole trend - slimers, children and adults adore this toy for a reason.

Initially, the slime was only sold in green. After the release of the series "Ghostbusters", the slime received the name, like one of the heroes of the series.

Slime is sold in children's toy stores in small containers that also serve as containers for storing them. Slime, at first glance, seems like just an elastic mass, but in practice it can be, requires daily nutrition, maintaining a comfortable temperature, humidity, and even reproduces regardless of gender. Slime is not picky when it comes to food: it needs a few drops of pure salt and a pinch of salt as a top dressing, more details.

You can not only buy slime, but you can also make it yourself at home. In this article we will tell you how to make slime.

How to make slime at home? Recipes

We have prepared a list of the best recipes that will suit everyone's taste. From simple to complex, edible and inedible. Read the post to the end, you will fall in love with one of the slimes and will definitely want to repeat it.

If you want step-by-step recipes with photos, then look at them on our website in the If you do section, then let them participate in this exciting process. If you are that same child slimer, then read the instructions carefully, make sure that the ingredients do not get on the mucous membrane, and also do not put the slime in your mouth.

How to make slime without sodium tetraborate in a bag. Step by step recipe

The classic slime recipe includes two required components:

The manufacturing sequence is as follows:

To ensure that the result does not disappoint, the glue must not be expired. Watch this moment carefully. It is better not to use already opened glue.

Slime made from water and cornstarch

Making slimes yourself is a fascinating process, but the more complex the recipe, the more skill it will require. It is better to start experimenting with slimes with the simplest and most budget-friendly recipes.

One such method: making slime from water and starch. Although the result is slightly different from the store version, it is environmentally friendly and safe, which is important for a children’s toy.

You will get a liquid slime, it will not be crushed in your hands like the usual thick slime. But it’s fun to stick it to various objects, pull it and, of course, cook it.

It is better to use corn starch, it gives better elasticity, but potato starch will also work. To get an elastic slime, the amount of starch can be increased. If the slime is too runny, add more starch. Until it thickens.

Shampoo slime

Elastic, well-stretchable slimes are obtained from ordinary shampoo. On the Internet you can find a lot of different recipes in which shampoo is combined with various ingredients.

The easiest slime recipe:

Mix 100 grams of shampoo and water in a bowl, add 200 grams of starch. Everything is thoroughly ground and placed in the refrigerator for 12 hours.
Thick shampoo and shower gel of a similar color are mixed in equal proportions in a container. Gradually add salt and bring to a thick consistency. Place in the freezer for 15 minutes, take it out and the slime is ready.
Pour some thick shampoo into the container. Add the same amount of toothpaste and mix until smooth and thick. If the resulting slime is too thick, you should add more shampoo. But if, on the contrary, it’s a bit runny, then an extra portion of toothpaste will help.

Original shampoo slime recipe

A plastic bag helps to knead the slime, because such slime sticks to your hands at first. If the slime turns out too liquid, then add an activator, for example, Borax.

How to make slime from toothpaste without glue

Toothpaste is very often used to make a bright slime that stretches well. The simplest recipe consists of three ingredients: toothpaste, liquid soap and flour.

This slime does not stretch well, but it is easy to make and the ingredients are available in almost every home.

Another original slime recipe using toothpaste

We do not guarantee that you will get slime if you use another toothpaste. Each paste has its own components. Sanino Anti Cavity toothpaste was used for the recipe. Try different toothpastes to see if it works. Surprisingly, we tried different recipes with toothpaste many times, but often it turned out completely wrong. I was very pleased with this recipe for its simplicity, but it has a drawback. You have to wait two days.

We will need:

A bowl
PVA glue
Stirring spoon
Sanino Anti Cavity toothpaste.

How to cook:

To prevent the slime from sticking to your hands, you can lubricate them with sunflower oil. Baby cream is also great.

For the recipe we used this video:

Making slime from plasticine

If there are small children in the family, then there must be plasticine in the house. It can also be used as a base material for making plasticine slime at home.

Slime prepared this way will last quite a long time.

To make such a toy you need:

Making slime from ice

When making slime at home, you can experiment with different ingredients. For example, it’s worth trying a recipe with the addition of ice and getting a cold, “refreshing” handgam.

The cooking method is very simple:

Unfortunately, this slime has a very short shelf life - until it melts.

How to make slime

To make the slime transparent, you need to use colorless office glue when preparing it.

Transparent slime will look very impressive if you add glitter or multi-colored balls to it.

There is a more “adult” version of making slime, which instead of glue contains polyvinyl alcohol in the same amount (100 grams). Sodium tetraborate is added to the alcohol, everything is thoroughly mixed for ten minutes.

Important! Slime prepared in this way is not suitable for children.

How to make slime - bouncing ball (Bouncey Ball)

Today I'll show you how to make jumping slime! It looks like a ball. jumps and is very elastic, this is a great alternative to regular slime, because it’s just as fun to play with!

So, we need:

Water - 4 parts
Borax - 1 part
Working glue - the more, the bigger your slime
Glitter and dye - a drop if you want

How to do:

First, mix water and borax in one container, making sure it dissolves well. Can be diluted in slightly warmed water for faster dilution. I used 1 cup of water and a quarter cup of borax, you can use less to save ingredients.

In another bowl, mix your glue (I took transparent stationery for a better effect, it looks more impressive with glitter) with dye and glitter. I wanted to get several multi-colored balls, so I decided to take several plastic cups and mixed glue with a different color of dye in each. Don't forget to add glitter at this point, otherwise it will be very difficult to do it later.

Now the most important part - take a large spoon and put a lump of glue into the liquid with borax. Don't stir! The goal is to turn this lump into a ball in the future. That is, the glue must take a lot of borax and become rubbery. Do not skimp on borax under any circumstances, otherwise the recipe will not work! Start kneading it directly in the water, carefully, without stirring or separating into parts. as soon as it has “grabbed”, you can take it out of the water and try to roll it into a ball. if it is not yet so elastic, dip it into the solution again, and so on until it turns into an elastic rubber ball! Ready!

P.S.: In the video they add borax to the glue, you can do that. But I wouldn’t add starch - without it I think it turns out more bouncy. Try it and choose which option you like best, and share in the comments!

How to make a slime toy from shaving foam

Slimes made from men's shaving foam are light, airy, and have an unusually soft consistency.

The recipe for this slime is quite simple.

A small bottle of PVA glue (100 grams) is poured into a small bowl. TThen gradually add a glass of shaving foam (white foam, such as Gillette, is best). If the mixture is not fluffy enough, do not skimp on the foam, add more.
Add shaving foam and stir until the mixture becomes airy.
We need an activator to make the slime thick and fluffy. We use a lens cleaner that contains boric acid. Be sure to make sure that the composition contains boric acid. Add lens cleaner a few drops at a time until the fluffy slime thickens.
Knead the slime until it becomes elastic. If the toy does not stick to your hands, then you succeeded.

If you want more fluffy slime recipes, go to.

Fluffy slime without shaving foam

Everyone loves fluffy slime. But what to do if you have all the ingredients on hand except the most important thing - shaving foam? Don’t panic - there is a solution: instead, you can add regular...bath foam or liquid soap, which you certainly have at home! In addition, we will need glue and lens solution or sodium tetraborate.

Instructions on how to make fluffy slime without foam:

Mix liquid soap with a small amount of water and foam with a foam sponge. You should get a quantity of about 2 cups.

Then add 2/3 cup of white and the desired dye. Mix well until smooth. We add lens liquid containing boron so that our slime sticks well from the walls. Mix and knead. Ready! The slime is airy and fluffy, no worse than shaving foam!

How to make matte slime

To make matte slime you will need a pigment dye, which is added to the standard recipe as an additional component. You can use any color, but the coolest matte slimes are obtained if you use a golden color.

The cooking sequence is as follows:

Knead the slime with your hands so that it absorbs the color. If the slime looks “strange”, or you have used too much dye or want a different color, rinse it gently under a light stream of water.

How to make slime from a film mask

To make slime without using glue, you will need such a modern cosmetic product as for cleansing facial skin. We used NIVEA. We will also need shaving foam and a slime activator - a product for contact lenses.

As a result, you will get a stretchy slime that should not stick to your hands. If it sticks, add a little more lens solution.

Soda slime recipes

Soda is an excellent material for making slime with your own hands and involving your child in this activity.

There are many recipes for making slime from soda with the addition of components such as PVA glue, soap, glycerin, detergent and shampoo, and salt.

Recipe 1

Slime made from baking soda and glue.
Mix one sixth of a glass of water with soda to the consistency of sour cream or thick cream. Add dye.

Mix a similar volume of water with a small bottle of PVA glue and soda. Then intensively mix everything together.

Recipe 2

Mix soda and salt in equal proportions. Add liquid soap or soap solution. You can add a coloring agent. Place the container with the resulting mass in a transparent bag and place it in the refrigerator for a couple of hours. Then we take it out and knead it well in the bag. Pour out excess liquid. If the slime has not thickened, then we will need sodium tetraborate (liquid). Add a few drops.

Recipe 3

Dilute sodium tetraborate in water at room temperature and add glycerin (4 drops). Mix one fourth of the solution with PVA glue and dye. While stirring, gradually add the remaining solution until the required consistency is obtained. Glycerin added to the slime will give it shine and elasticity.

Slime from a glue stick

Such a common office supply as a glue stick is also suitable for making a slime toy out of it.In addition to glue, we will need sodium tetraborate, flour and dye.

Step-by-step instructions for making slime from pencil glue:

To do this, pour a little flour onto a cutting board, spread the slime and intensively knead and stretch for a while.

How to make a slime magnet

Perhaps the most original is the slime, which moves along the surface following a small magnet.

This toy can also be made at home. The only caveat is that in addition to traditional ingredients, you will additionally need components that are sold only in hardware stores.

Magnetic slime is made as follows:

A glass of ordinary cool water is poured into the container, half a teaspoon of boron powder (sold in a pharmacy) is added there and mixed thoroughly until the boron is completely dissolved.
A glass of water is also poured into another container, where a small bottle of PVA glue (30 grams) is added and stirred.
Dye is added to the resulting mass with glue. If you use phosphorus paint as a coloring agent, the resulting slime will glow in the dark.
Sprinkle iron oxide powder on top of the slime, which can be bought at hardware or hardware stores, for example, Obi.
Pour the solution with boron powder into the container and begin to stir until thickened. As soon as the mass becomes elastic, stop adding boron.
Mix thoroughly and knead with your hands.

In order for the magnetic slime to start moving along the table and rise, you need to move a magnet or a large nut (bolt) around it - the slime will crawl after the magnet.

Making slime from shampoo and salt

It will take no more than 20 minutes to make slime from regular shampoo and table salt.This option is completely safe - there is no need to heat anything, melt it or use chemicals.

ATTENTION! The recipe works with some foreign brands of shampoo: do not try this recipe unless you are willing to try multiple brands!

If the resulting slime sticks to your hands, just add a little more salt.

Cloud slime

Cloud slimes are gaining particular popularity; they are also called cloud slimes. To make them, in addition to the usual ingredients, we need artificial snow. American cloud slime turns out airy and crispy, like snow! And if you make it in delicate colors, it will look like a real cloud!

Step-by-step instructions for making cloud slime: mix 100 ml of PVA glue, 20 ml of shaving foam, 5 ml of facial wash, 5 ml of hair mousse, 5 ml of baby oil, and a few drops of tetraborate (or lens liquid).

Now The most interesting thing: dilute artificial snow with water according to the instructions and add it to the resulting slime! If desired, you can add dye and a drop of essence for aroma! Knead well andstretch it. Slime is ready!

How to make slime from hair gel

I suggest making a simple recipe for slime from hair gel. This is a transparent slime that is very similar to clear slime, but can have a beautiful shade if you choose pink or blue hair gel (I've seen these at Rive Gauche or Rainbow Smile). The ingredients are the easiest, and most likely you have on hand:

Hair gel
Water
Stationery transparent glue
Liquid for lenses

Pour about 100g of hair gel and 1/2 cup of water into a mixing bowl. Mix well. Now add the craft glue. The size of your slime depends on how much glue you use. I was making a large slime, so I took 200 ml.

After you mix the mixture well, you can add an activator - in our case it’s lens liquid and soda. Pour a little at first (a couple of tablespoons for my amount of glue) and add as needed. At the end, the slime should stick well from the walls of the dish.

The most important thing: you can start playing it right away, but this is wrong. The slime must sit in a sealed container for at least 3 days, then its structure will be completely formed and it will look like classic slime from the store!

Bubble Slime

One of the funniest and most interesting types of slime, bubble slime - it makes good bubbles that everyone loves to pop.

So, we need:

Glue (I used clear stationery glue)
Baby powder
Body lotion
Hand cream
dye (to your taste, I used yellow)
activator (lens solution)

Mix the glue with dye and powder (a little), add a little lotion and hand cream each, and little by little add the activator.

You don’t need a lot, here there should be a little less of it than in a classic slime - it should just start to come off your hands, but be a little liquid (and not rubbery, when there is already a lot of activator). Then you will definitely get a big bubble!

I like to make bubbles three ways:

Place a thin layer of slime on the table, making a large bubble;
Use cooking utensils like a colander to make a lot of bubbles at once;
Blow from a straw.

I'm sure you'll love bubble slime as much as I do!

Glossy slime

One of the new types of slime is shiny and stretches well into a film. Its secret is simple - when making it you just need to add baby oil. He clicks great and is a lot of fun to play with!

We will need:

silicate glue (for example, Berlingo) - 2 parts
PVA glue (I have Stolyar) - 1 part
baby oil
cream
shampoo
activator (I have lens liquid)

Mix 2 types of glue, add 1 tablespoon of baby oil and one teaspoon each of cream and shampoo.

Now you can add coloring and flavoring and begin thickening with the activator. All that remains is to knead in your hands and, if desired, add charms or polystyrene foam balls. Ready!

Liquid slime or liquid slime

Everyone has seen funny ones flowing out of a bottle or from rubber squishy emoticons. Now I will tell you how to make them.

We will need:

Tetraborate
Supplements (if you want)

In preparing this type of slime, everything is extremely simple: first you need to pour a little water and mix it with glue. Then add dye or fragrance if you want an unusual slime, and only then add tetraborate.

The more water you add, the thinner your slime will be. You need to find the option when the slime is already coming off your hands, but has not yet become thick. Put it in the squishie and click)) A great game for friends is ready!

Sand slime

It turns out that you can make slime even on vacation, from! All you have to do is find working glue, you can add shells and beautiful pebbles, and play with it on vacation, and even bring it home as a souvenir!

So, we need:

office glue - 1 part
sodium tetraborate or other activator that you have on hand - a few drops
water - 2 tablespoons
sand - 1 part
shells and pebbles - for decoration

Mix glue, water and sand until the mixture looks like sour cream. You need enough water so that the mixture is easy to stir, but not too liquid - do not overfill. You can take regular or kinetic sand, but it must be clean. If you are not sure about the amount of sand, you can add it after the slime is ready, little by little - you will know when it is enough.

Add 3 drops of activator and begin to thicken the slime little by little.

Once it's ready, decorate it with some pretty pebbles from the beach. It's worth spending time and finding some more interesting ones! Have fun with your new slime!

Slime from Teymurov's paste

This type of slime is very reminiscent of airy and light slimes, since the paste itself has a rather soft texture. To make slime with Teymurov's paste better, first spread a little paste on the bottom of the bowl in which you will knead the slime, and then pour in the glue and stir vigorously.

So, we need:

PVA glue - as much as you would like the slime to be
Teymurov's paste - a few peas
additives for decoration

After you have mixed the glue with the paste and it has thickened, you can add dyes, flavors, charms - in general, whatever your heart desires!

I added purple matte dye and a dash of lavender scent. I really liked this slime!

How to make edible slime

It turns out that you can not only play with slime, but also eat it safely. The main thing is to choose the right recipe and select quality ingredients.

The most popular children's sweets are used as the basis for edible slime:

colorful jelly bears;
marshmallows;
chewing candies (marshmallows);
chewing gum, etc.

To add sweetness to the toy, experimenters add chocolate spread (Nutella and other similar desserts), condensed milk, powdered sugar, a variety of edible powders and even Coca-Cola, Fanta and Sprite. The base for making edible slime can also be starch or regular flour.

Slime made from flour and water

The simplest recipe for environmentally friendly, safe slime consists of flour, warm (never boiling water) and cold water, food coloring. All ingredients are mixed until the consistency of elastic dough.

The resulting mass is sent to the refrigerator.

Condensed milk slime

One of the simplest recipes looks like this:

Jelly figures (bears) are an excellent base for making edible slimes. They almost always have a bright, attractive color and retain their jelly-like structure perfectly.

Nutella slime

There is an original and at the same time simple way to prepare edible slime using only two ingredients: white marshmallows in the form of standard candies and Nuttella chocolate paste.

Colorless marshmallows combine well with various varieties when preparing edible slime. You can experiment with taste and color, add multi-colored small dragees, food and natural dyes.

Regular chewing candies can also be transformed into slime. To do this, you need to heat (melt) them in a water bath or microwave, place them on a board sprinkled with powdered sugar, knead and knead until the correct (soft and stretchy) structure is obtained.

Important! Edible slimes are unfortunately short-lived. You can only play with them for a short time, but you need to eat them before they collect dust and other contaminants..

General tips for making slime at home

For example, slime will no longer be slippery if you add a certain amount of pharmaceutical glycerin. Lushness is achieved with water peroxide; elasticity can be improved with a few drops of acetic acid.

To increase the size of the slime, you need to place it in a container of water for about three hours. If the slime disintegrates, it’s not a problem. Sprinkle a little table salt on top, it will absorb excess moisture, and then knead the slime thoroughly. It will become elastic again and increase in size.

You can create a full-fledged anti-stress pear if you place a swollen balloon in the slime - it’s so convenient to knead it with your hands (it doesn’t stick and doesn’t break).

Today I will share a recipe for lime liqueur, which is also called “Limechello”.

To prepare liqueur we will need:

* Vodka - 1 liter;
* Alcohol - 200 ml (96 degrees);
* Cardamom - 3 pods;
* Sugar - 200 g;
* Water;
* Limes - 5 pcs.

The sequence of actions is as follows:

1. Take limes and wash them. Cut the zest from 1-2 limes (it’s delicious either way) and squeeze out the juice from all of them. Thoroughly.

* Try to keep the zest free of white areas. The finer the zest is chopped, the faster it will impart aroma to the drink and the less time it will take to infuse.

2. Take a container with a volume of at least 2 liters, mark the level of 2 liters on it. Pour vodka, alcohol and juice from our limes into the container. Add zest and cardamom there.

3. Close the container tightly and put it in a dark place for 4-7 days. After 4-7 we prepare the syrup. Add 200 grams of sugar and 200 ml of water - pour into a saucepan with a thick bottom, put on the fire, stirring until the sugar is completely dissolved and begins to boil, but do not let it boil. Cool, skim off the foam (if any remains) and pour into our container with zest, cardamom and alcohol.

4. Pour another 100 ml of water into the same saucepan, rinse it and carefully begin to gradually pour it into a container with zest, cardamom and alcohol so that the total amount of product is brought to our mark of 2 liters. If it works, Barack will appear and approve.

5. Leave the drink alone for a couple of days, then take a sample. Well, is it delicious? :) If you leave it for a couple more days, then there will be a fire. After 2-4 days, depending on your willpower, take a bandage - gauze in 4 layers and filter the drink. Leave it for another couple of days and you can actively use it.

We use food-grade alcohol, without foreign impurities, and as odor-neutral as possible.

Click the button to subscribe to "How it's Made"!

Hello young readers. Recently, the question of how to make slime without leaving home has become increasingly popular. That is why it was decided to create this article. You will learn how to create this toy in different ways, using different materials, familiarize yourself with safety rules and recommendations for use.

Precautionary measures

Since the preparation of such a toy requires different materials, some of which may be toxic, it is very important to follow safety rules.

Before cooking, you must wear a protective apron, gloves, other items of clothing, and sometimes a respiratory mask. This must be done to exclude a possible allergic reaction to the components of the toy. In addition, these clothes will protect you from contamination when using, for example, dyes.
It is not allowed to smell, much less taste, the components necessary to create the slime. You can get both an allergy and serious poisoning, as well as a burn from a chemical substance.
Use only dishes that will not be used for food later. It is better to use a disposable set of utensils.
Remember to constantly wash your hands after handling slime.

Cooking with and without water

First, let's look at the option of making slime from water:

you will need to purchase borax (powder);
mix it with 200 ml of water, you can use distilled, boiled or running water;
in a separate container, mix water and glue in equal proportions; as a rule, a quarter cup of each ingredient is enough;
if you want your slime to have an unusual color, then add dye;
add a borax solution to the well-mixed glue and water (the last one is half a glass).
if it turns out too liquid, then add a tetraborate solution.

Now let's look at the option without water:

pour glue into the container, add tetraborate in the form of a solution: it is necessary to pour in the volume necessary to form a thick mass;
now is the time to add dye, the amount is determined taking into account the intensity of the expected color;
If you feel that the slime is not soft enough to the touch, you can rinse it with water.

Magnetic slime

You will need the following materials:

Neodymium magnet;
capacity;
sodium tetraborate;
water;
iron oxide;
PVA glue;
any coloring (preferably food coloring).

Tetraborate (half a teaspoon) is added to water (200 ml).
In a prepared bowl, mix glue (about 30 grams) and half a glass of water.
Add dye.
Now you need to pour in the tetraborate solution and bring it to the required consistency with constant stirring. If you see that it is already in a suitable state, stop pouring in the tetraborate.
In order for the magnet to attract, sprinkle the toy with iron oxide, preferably over the entire surface, evenly.

If you are interested in the question of how to make slime without glue, then you can use a recipe for a plasticine toy, which you probably have at home. You will need:

one pack of gelatin (edible);
plasticine (packaging);
capacity;
wooden spatula or spoon;
iron container.

The first step is to prepare the gelatin. To do this, pour it into an iron container, fill it with cold water, stir well and leave to infuse for an hour. Next, the soaked gelatin needs to be heated, bringing to a boil.
Now you need to knead the plasticine well (take soft) in a mixing container. In addition to 100 grams of plasticine itself, you will need 50 ml of water.
Pour gelatin into the prepared homogeneous mass, stir everything thoroughly until a homogeneous mass is obtained.
The prepared mixture is sent to the refrigerator until completely solidified.
Now the toy can be used for its intended purpose.

Cooking with soda

To prepare you will need:

mixing stick;
a tablespoon of soda (baking soda);
PVA glue (50 grams);
half a glass of water (warm enough);
plastic container;
food coloring (just a little);
gloves.

Shaving foam to help you

You will need:

shaving foam;
glue;
emerald paint;
hand soap;
boric acid;
water;
wooden stick;
capacity;
jar.

Pour 125 mg of glue into a bowl, it is important that it is of good quality and thick enough.
Now you need to add paint (a few drops).
Now it’s time to add shaving foam to the resulting solution in such an amount that after mixing the ingredients you get something resembling a sweet cream.
Add boric acid (15 grams) to a jar of water and add a little liquid soap.
Stir the resulting mixture with a stick.
Pour from the jar into our container with foam.
Stir to obtain a homogeneous mass.
Now your slime is ready.

Without tetraborate

If you are interested in the question of how to make slime without sodium tetraborate, then for this you will need:

water (cold and hot);
flour;
food colorings.

Take a container, add flour (two cups), previously sifted.
Add cold water (a quarter of a glass) and a little hot water, but not boiling water.
Now everything must be thoroughly mixed until a homogeneous mass is obtained. It is important that there are no lumps.
Add a little dye to the finished mixture.
Mix to completely color our future slime.
Put the finished mixture in the refrigerator, after three hours, take it out and knead it.
The slime is ready.

Shampoo and water

If you are interested in an option without PVA, and also using ingredients that you have on hand, then this recipe is what you need.

shampoo (approximately one hundred milliliters);
capacity;
one hundred milliliters of water;
two hundred grams of starch;
mixing stick;
dye.

Toothpaste and soap

You will need:

approximately 20 ml of liquid soap;
the same amount of toothpaste;
five teaspoons of flour;
capacity;
stir stick.

Squeeze the required amount of toothpaste into a metal bowl.
Add liquid soap and stir everything until a homogeneous mass is obtained.
Gradually add flour into the resulting mixture, stirring all the time.
In the final stages, knead the dough with your hands.
To finish, lightly moisten the slime and knead it with your hands.
The toy is ready.

Hydrogen peroxide and starch

This method is quite affordable financially. However, the resulting result is more like a jumper due to its jumping ability.

You will need:

capacity;
glass of water;
100 g starch;
PVA glue - 100 grams;
hydrogen peroxide;
food coloring;
mixing stick.

Mix water with starch in a small container until a jelly-like consistency is formed.
Add glue and mix everything thoroughly.
Pour a few drops of peroxide and food coloring in the same amount into the resulting mixture.
Mix everything thoroughly.
If you get a thick mass, you can add a little water.

We prepare from different types of glue

If you have a question about how to make slime from glue, then I bring to your attention several of the most current recipes.

PVA glue with sodium tetraborate

You will need:

sodium tetraborate;
wooden mixing stick;
plastic bag;
capacity;
dye (you can use food grade or gouache);
glue.

Pour two hundred grams of glue into the prepared container.
Add dye - just a few drops, you can also use beads or sparkles.
Stir everything with a wooden stick.
Continuing to stir, carefully add sodium tetraborate - about one hundred milliliters.
When you see that the product takes on a jelly-like shape or becomes elastic, place it in a bag and remember for several minutes.
Now your slime is ready.

You will need:

plastic bag;
capacity;
Titan glue;
stirring stick;
dye;
shampoo.

Add a little glue to a plastic glass container, and also pour shampoo into the container (in the same amount).
Add a little dye.
Stir everything thoroughly until a homogeneous mass is obtained.
The fact that the slime is ready is indicated by the lack of stickiness of the toy.

Silicate glue and alcohol

To prepare you will need:

wooden stirring stick;
plastic bag;
capacity;
dye;
silicate glue;
alcohol (can be perfume or an alcohol tincture of some acid).

Squeeze 100 grams of glue into a container.
Add a little dye.
Pour in fifty ml of alcohol.
Stir everything thoroughly until a homogeneous mass is obtained.
Now all that remains is to rinse the toy in water at the optimal temperature.

When choosing the right consistency, you need to focus on your feelings. Properly prepared slime is a single clot, a homogeneous mass, quite viscous, but sticky.
If the slime turns out to be too dry, then add liquid components; if it is too liquid, add dry ones.
To make your slime look brighter, you can add not only dyes, but also phosphor paint or pearlescent dye, glitter.
You need to store the slime in a carefully closed container in the refrigerator.

Now you know how you can make slime yourself without leaving home. Don't forget about protective equipment and that toys should not be tasted. It is advisable to prepare slime in the presence of adults. Choose the option that suits you best and start making.

Where can you find sulfur? Sulfur in nature. How to obtain sulfur from hydrogen sulfide

How to make slime at home without glue or with it